How to Use the Save Function

Hello and welcome to this video on the GIMP. Now in this video, I wanna go over with you a little bit on how to save your images once you’ve done all your editing and got all your docs in a row. So first off, normally you’d think, “well you go over here to file and oh wait a minute… okay… so it’s not gonna be there.” Wrong file. You wanna go to the File in the menu of the image you’re gonna be saving. So you’re almost right. Click on File here. Now we’ve got a few choices here. Actually, there are so about five of them. And if you were to click the Save function, then if you’ve already saved this image once and given it a name and so on, then by clicking on Save again it’s going to overwrite that original image file.

So you wanna make sure you’re doing this right. Otherwise, if say, you aren’t really sure then you wanna go to Save As. That way it will give you the opportunity to save it in a different location or to just confirm in your mind where it was originally saved at. So in case the original one was one that you didn’t want to overwrite then you definitely wanna do the Save As. Because if you have not saved this in the past, given this a name, and so on, then by clicking on Save it will bring up the same dialog as if it were being Saved As. For example.. And since I’ve already saved this once, you can see up here this gives it a name. Otherwise, perhaps say something like untitled or unnamed. Let’s go ahead and do the Save As. And this is a little bit different than your typical Windows save window. It gives a lot of different options here.

First of them, obviously the name. You wanna give it a name. And as you can see right here we’ve got a name for it already and it’s in a .psd or Photoshop extension. Let’s go ahead and give this a name of IMSoftwareBoxCover. And we’re gonna save it in the images folder or you can kinda do some browsing there. Of course, you kinda limit it a little bit. You can click on this or you can go here and hit this plus sign for “Browse for other folders”. It drops down and gives you a lot more options to pick and choose from. And this is probably the best way I would do it is I would just click on this and then click on Save. Then it should open up the next time in this format rather than in the close format as it was originally. So here we can just click on where we want to have the image saved, and then here is the folder, and then here is the preview.

So you can kinda see here. It will give you a preview over here of what the item is that you’re looking at of course to where you gonna be saving. Let me cancel this out real quick here. And back here, Save As… You can see how it opens up again in this format. Now this is the name we’ve got but up here we don’t wanna name this a .psd or for that matter even overwrite the existing files. So let’s go ahead and change this again like I had it a second ago. SoftwareBoxCover. And we don’t have any extension on there just yet. You can do that down here. Oh, and of course, you can create a new folder if you wanted to. This gives you a bit of a path for the location of this image. You’re gonna be saving that right here. So let’s go ahead and hit this plus sign to select file type by extension. As you can see it gives you a whole bunch of options to choose from here.

Now the main ones you wanna consider in working with the most of the internet marketing or webpage style images would be the .JPEG or the .JPG, the .GIF, or the .XCF which is kinda like a .PSD or Photoshop only the GIMP version. Then that would be another one would be the .PSD or Photoshop. And the only other extension that I would consider here would be the .PNG which is pretty close to being the same as the .GIF only the .PNG tends to have a little bit better luck with the compression. It just tends to work a little bit better in some cases than the .GIF but they are so minute that you can probably get away using the .GIF without any hassles. So the three biggies are gonna be the .JPEG, .JPG, the .GIF, and the .XCF. Those are the ones we’re gonna be working with more times than not. And you can see right here the extensions, and here are the file types here, and just kinda go on through here. You can see there’s quite a few options you can use to play with here. But here’s a .JPEG, the .PNG, the .PSD, the .GIF, and the .XCF. Now the .XCF again is similar to that of the .PSD where this allows you to save all the layers intact and the original uncompressed image. So naturally, this is gonna be a larger file. So if you’ve got somebody that’s gonna be downloaded in this, you’re gonna be uploading this, this is gonna be a lot larger file size. It’ll take a little bit longer in uploading and downloading than the .GIF or the .JPG.

Now the .JPG, the .JPEG is much better suited for things like pictures, photos, gradients. You know, things with lots of colors whereas the .GIF and the .PNG are more suited towards the lone number of colors. Ideally, those with like transparencies. In other words, those that do not have a background. And also one of the cool things about .GIF is you can create animations with it too. And we’ll go on with that in a different video. Anyway, those are the basics behind saving your images and whenever you click on this down here you can see up here where it automatically assigns an extension. So let’s go ahead and do this. Given an extension of .XCF, the GIMP version of Photoshop, and then we’ll click on Save. I’m gonna show you something about the .JPG. It’s pretty cool. So I’m gonna give it a .JPG extension. Click on Save.

It’s gonna give you this because I’ve got it into layers ’til we haven’t compress all those as you can see here. It’s still all these layers here so it won’t save it with all those layers like that so it’s asking us if we wanna take care of that and we just go ahead and say yes. And we do that by clicking on Export. Now this is a cool part here. If you show preview in image window then you can kinda see it based on the quality. Now just check out the original size where we at right now. We can up this size a whole bunch. Well almost double in size but you really can’t see that much more of a difference in the quality. So that’s one thing too you wanna use this slider bar here for is to save this space or the file size.

So if you take this all the way down to four or seven you can see how the quality degrades a great deal there. If you’re saving quite a few kilobytes but do you want the quality to reflect that? I’ll leave that up to you. Right there is right about where it was and it looks fairly decent. So that’s what I would do. Again, something as far as the .JPEG this is an additional option that you can play around with where you can kinda compress it even more so long as you do not notice any major degradation in the quality of the image you’re saving. So that being said, that’s pretty much a quick rundown on how to save your images using the GIMP. Thank you much for watching!

***To download the PDF of this tutorial Click Here.

How to Make your Images Transparent

Hello and welcome to this video on the GIMP. Now in this video, I’m gonna show you how you can prepare your images that have this white background for EBook covers, or software box E-covers, and so on. Or for that matter, let’s say we’ve got a picture from a wedding for example that has something or someone in the picture that you don’t want in the picture. You can do the same technique to remove that particular item or individual from that picture. For example, in this case we’ve got a software box E-Cover here and this just would not look like the same if it had this white background in there. It looks kinda dorky, actually. So in this video I’m gonna show you how you can effectively remove this white background and let me show you what the end-result would look like. It would look like this. Now some folks call this rendering, some folks call it transparency, I call it removing the white background. So whatever you want to call it, hopefully this will be the end-result. Since this can be rather intricate and a little time-consuming, I can explain this the same technique in detail by showing you something a little bit easier to deal with. Let me get rid of these guys here. Get rid of this box here.

And we’ve got this icon for Adobe PDF and we have this icon for Adobe PDF transparency. I’m gonna use this as example because, well, frankly there’s square lines. Whereas with the people, you’ve got the head, you’ve got the hair, you’ve got the fingers, you’ve got the dollar bills, and so on. And again, the same technique can be used just with this one it won’t take so long whereas with the other one you wanna take your time. So let’s get right into this. Now first off we’ve got our image here. Let me open up something that might resemble a header. Say if it were about 700 pixels wide, 150 in height, and go to Advanced Options. We want a white background. We’re gonna change it out here in a second to blue. Now over here we’ve got our Layers Dialog box and that’s this guy right here.

So now what we wanna do is we want to put this guy here right in here. I’m gonna hold my control button down and then click on the C to copy this on my clipboard. I wanna create a new layer here by clicking on this and let’s make this 150 by 150 which is about the same size as the adobe icon and turn in my clipboard so I should just be able to paste. There we are. Again this is why we do not want this white background. We want this to blend in naturally with the blue background. So let’s get rid of this. Actually, let’s not get rid of it. It’s floating around up here so let’s go and anchor this to the new layer we already created by right-clicking, “Anchor Layer”, and just close the eyeball so it will go bye-bye. Let’s go ahead and get this guy down here and get our work space up here.

Now then, right now we are at a hundred percent so to make this easier for us to see the details in the lines here, in the outline because what we wanna do is we’re gonna cut this white background out. We’re gonna toss the trash so it’s not there anymore. Let’s bring this a little bit larger than life so that way you can see most of the pixels and we can go to 800 to see even more. And this is what you would wanna do when you’re dealing with the details such as somebody’s strands of hair, or their fingers, or like with that image of the two people holding the dollar bills. You wanna go to the 800 pixels. The larger you can get, the better. The more detailed you’re gonna be able to get. But for the sake of this video, we’re gonna go with four. And now then we want the Paths Tool, click on that. We wanna be in Design mode and let’s go and start with the top here just for the sake of argument. And the more details that you got to deal with use less space between your clicking. What I’m doing here is I’m just clicking my left mouse button to connect the dots. Since I am dealing mostly with straight lines here, oh and if you screw up something like this here or like that, control button on your keyboard, letter Z and just keep it the letter Z until you get back up a good spot.

Let’s get this down here and just continue on down the line and you can probably see now why I chose this particular item for this video because again it’s mostly straight lines and you don’t want to spend all day watching me do this. And you’ll see that this here is gonna show up here in a second. That’s a mistake and you just wanna go back and correct that because you can’t just go over here and hold your mouse and squeeze it in. You just hit your control + Z button and go back until it’s at a good spot and then do it over again. Hopefully that’s making sense to you. Now you wanna connect this. You wanna complete your outline here and to do that hold your control button down and you’ll see where you’ve got the two circles. Right there you got the circle with the line through it.

Now we’ve got the two circles interconnecting and it looks like an infinity symbol, then click your left mouse button and you are connected. Now then since we are now connected, what we’re gonna do next is we want to go over here to our layers and then right-click and we want to go all the way down to “Add Alpha Channel”. And once we’ve added the alpha channel to this, we come over here in our dialog box and click on “Selection from Path” and that will get our little ants marching. And what that does that’s selected because it’s a selection tool. Our Paths Tool, it’s basically a selection tool. It selected our image we’re going to maintain. Now what we wanna do is we want to invert this so we can get the marching ants going around the outside of what we wanna get rid of. And to do that we want to invert this and we can do that a couple of ways. Go to Select > Invert, or we can also hit the control button on our keyboard and the letter I, as in invert. So now we’ve got that inverted. We click on the delete key. And there you have it folks!

All these little checkers here that tells you that this is basically no background. I mean it’s what they call transparency. And you can kinda see where we could have made a little bit better lines here because it will show up here when we put this up against that dark blue background. And again if it weren’t for the video, you’d wanna spend a little more time with this. Be a little more perfection. And again if these were brought up to an 800 pixels size then you’d be able to see those details so those pixelated boxes will be a lot bigger and you could be a little more extra detailed and the end-result would reflect that. So let’s go ahead and get this back down to a hundred percent. Get our little windows shorten up here a tad. Now at this point you wanna save this. You can do that just by going to File > Save As > and give it a name right here and I’m gonna say Transparency. And then come on down here and click on Save.

Now if you wanted to save it that’s something other than a .GIF, then you come on down here to “Select File Type (By Extension)” and there’s a bulk load of options down here. For the time-being, hit this minus button, bring this character back up here, hit the Save, and then this comes up as a .GIF option, click Save, that’s cool. What we wanna do now is we want to unselect this. Go to Select > click on None > and let us go ahead and move this guy into here. And what I can do here now go up here to the move tool and with this being highlighted or actually you can see here in the Layers box that this is a character that I’m working with right now and in the image box here versus this. So right now I’m working on this one. I’m gonna copy this to my clipboard. Control button on the keyboard and then click on the letter C, as in Copy. It’s in my clipboard now. Let’s bring this guy up here, get us another new layer similar to the other that we had here. Here’s our new layer here. Just kinda click on that so it’s highlighted and then click over here. Right-click V, as in Victor. And this is guy is floating so let’s anchor. Right-click > left-click on anchor, and now this is our.

This is what it used to look like with the white background and this is what it looks like now. Of course, it’s still kinda yucky with the imperfections there but you get the idea. And you can just click this down, move it around. And with the Scale Tool you can make it smaller. So that’s how you can remove the white background or any type of background from your image in so far as the E-Book or DVD E-Covers are created. This is how you could use your images to make them pop a little bit more. Make your images look a little bit nicer on those covers. So I hope you learned something from this and have a great day!

***To download the PDF of this tutorial Click Here.

An Introduction to Layers

Hello and welcome to this video on the Gimp. And on this video, we’re gonna be touching base on the layers. And this is our Layers Dialog Box here. Now, if you don’t have your setup similar to the way I’ve got mine here then you can get your Layers Dialog Box by several ways but one you can go over here to File because this is all it’s gonna be up here. Go over here to File and then Dialogs. And there you go. More than likely we’d do is you could just like what I did over on the right-hand side of the screen there.

You can just go up here to “Create New Dock” and then this one here. And that’s what I did kinda. This is one that I did before. I’ll just bring this one up here in place of that one. And then we’ve got the layers here, and we’ve got the Undo, we’ve got the Paths Tool, and we’ve got the Channels Dialog here. Actually, that was pretty cool. I might just leave that one up there. Anywho, that’s how you can get to the Dialogs Box. Now this one here just kinda go over a little bit of what else is involved with the Dialog Box and all the little cool things. Actually, I better move this down so I’m not confusing the issue too much. Here we’ve got the icon. We click on this to create a new layer. And we can use these up and down arrows to move the selected layer up and down and I’ll show you here in a second to kinda emphasize the importance of these.

And here we can simply duplicate a particular layer that we’ve got selected and if we’ve got a floating layer around or somewhere and I’ll show you. We’ve covered that in prior videos but if we got a floating layer around here and you kinda like what you’ve got and you want to make a part of your image then you click on the anchor and boom. That floating is no longer a floating. It is actually attached to the layer in question. And then of course we’ve got the dumpster here, the trashcan where you can either drag this to the trashcan or just highlight it and then click on the trashcan and poof! It’s in the trash. It’s gone. Now we’ve got some other items up top here . They are also pretty nifty. The opacity, well that’s pretty cool. You can add some special effects really easy to in existing image that you’ve got like some of the other tools we’ve got over here. We have a Mode selection where you click on the drop-down arrow. We’ve got a lot more options you can play with here to affect the said layer or image and let me just kinda show you here like for example right here I’ve got this CD selected and that’s this guy right here and you can see all the eyeballs are off here.

That means these layers are not showing. They are there, they’re not just showing. So if I were to save this right now, then it would save it without these layers involved in this image. In other words, you get what you see. If I were to click on Save and Save As, then this is what the image, the end result will be. Only one CD. Now this one right here, one of the beauties behind layers. Let me just kinda mention that too. One of the benefits behind, say, the Gimp or Photoshop is the ability to work in layers. And so you just don’t get with any other type of image manipulation software. For example, you’ve got this layer of the CD is on top of the layer of this box, the software box.

So as you can see it’s in front of and you can move around all over the place. Now that’s one of things about these up and down arrows is you can adjust this. For example, let me create a new layer and click on the New Layer icon. And over here it’s always good to name these two. That way you can stay somewhat organized and it gives you the width and the height and you can choose from the foreground color which you can see right now is dark blue, background color which is white, or you can have this either or white or transparency depending on which you are about to create. But for the sake of this example, I’m gonna leave it foreground color so it creates a dark blue layer. And basically it’s gonna be the same size as this so it’s gonna set on top of this. Again, one of the beauties behind layers.

Now everything below this is affected by this. Look at this; this is a blue blanket on top of all these guys here to cover them all up. Now one of the cool things about this is you can affect the opacity or the transparency of these individual layers. So for example, I’m going to decrease this opacity. As you can kinda see through this blanket like so. So you can see how it affects everything below it with the darker blue hue or tint. Now then with this layer selected, the dark blue layer selected it didn’t kinda transparent. Let’s move it down. Okay so now this layer here is on top of the blanket. It’s on top of that blue blanket so it’s shining through. So let’s keep moving it down. You can kinda see things are starting to come to a light here a little bit. Now then this box is on top of the blue blanket. Basically, you can see that it’s affecting the background now.

And now then the background, the white background, it’s on top of the blue. So basically, the blue is not having any effect whatsoever. So again, that’s one of the cool things about layers is that you can just kinda pile stuff on top of one another, give it more of a depth to your image, a lot of cool things you just cannot do with simple image software. So I’m not really sure how to put it. One other thing too. If you didn’t notice, of course this is the Gimp and this is a Photoshop extension. A “.psd” extension. So without having a three or four or five or six hundred bucks for a Photoshop software, you are able to manipulate and work with Photoshop images. So again, I just wanna point that out to you too. One of the things too I wanna mention here is that let’s say we’ve got this one CD selected. As you can see it’s kind of a beige, either way where there’s dark blue or beige that means it’s selected. This layer is selected. Let’s multiply this up a couple of times here and they are all just kinda hidden right behind here.

And then of course if you didn’t want them to be shown, maybe you wanted to save one image with just the box then you take the eyeballs out. You can save this as whatever, you’re gonna give it a name, and then you’re only going to get this software box. If you want those CD images back in there or DVD images, you just turn the eyeballs back on. And there you have it. Now then you can save it as and you’ve got this as your image. So that’s kind of a quick overview of some of the things you can do with the layers aspect of your Gimp software. Hope you learned something and hope you’ll be able to profit immensely from this little tool. Thank you much for watching, folks!

***To download the PDF of this tutorial Click Here.

The Blend Tool

Hello and welcome to this video series on the Gimp. And on this video, we’re gonna be working with the Blending Tool, otherwise known as the Gradient Tool. And a quick shortcut on your keyboard to get here would be the letter L, as in Larry. And here are the options that we have and frankly, we’ve got quite a few different options. More options that we’ve got time for in this video so I’ll just kinda brush over them to give you ideas on how to get started and then the rest of it is just up to your imagination. So basically in the mode section, we’ve got a bazillion of them.

Normal is where you’re gonna find yourself mostly. Dissolve is a good added functionality. Overlay is one that’s pretty good but we can usually tackle what this is over here in the Layers dialog box. Again, just play around with these different modes. You’re gonna find different opportunities for particular task that you’ve got to accomplish. Opacity brings it either full color or almost invisible or more transparent. You can reverse the color scheme that you got. This is the foreground and the background these two here. You can reverse that here.

The Offset, again, is another great functionality. It takes less blending, more blending. The Shape, you can go with Linear, Bi-linear, Radial, Conical, Angular, Spherical. I mean, this is pretty cool down here the Spherical. And you can add layers, add these on top of one another by creating additional layers with different gradients, different colors until you’ve got such a mishmash that you can do just about anything with it. So let’s jump right into this and get things going here. We’ll try the Linear first, 100% Opacity, zero Offset, and we’ll see over this color here. I’d like to have something of similar colors in nature. Yeah, let’s go with this.

Now let’s try something in the header neighborhood of 700 by 150 tall and we’re gonna make sure we go with the white background versus the foreground, background or transparency colors. And here we have our first layer. Pretty much I can do this is you just simply hold your left-mouse button down and you will affect the pattern by where you let go whether it’s straight across, at an angle, straight up and down, at some point in between. So there you go — dark, light. Now we can reverse this like I was saying. Click on this box here to reverse it. And you just do so much with this. As far as the Offset, let’s increase that and I’ll show you how it takes some of the blending away. See, you don’t have much of a blending part there. So that’s why you kinda leave this as zero. Let’s show you then Dissolve, it’s pretty cool.

To get a good feel of the Dissolve, you have to reduce the opacity a tad bit. Just kinda drag this and as you kinda see how that gives maybe a little starry night look if you will or a paint-splattered look. Now to kinda add to this, let’s throw together another layer on top if this one. And let’s go with a green just to be kinda peaky looking. Now this is how it’s gonna look here and let’s undissolve this, let’s go with normal. Let’s add that.

This is on top of our background already so let’s decrease the opacity or increase the transparency if you will. Let’s see how that adds to our. See how it kinda tames the a little bit and we get rid of it altogether, that’s the original. Yeah I don’t like that. But again, it’s just something you can play with here. Highlight this and trash that. Let’s just go with full-blown blue for the foreground and the background let’s go with white. Oops, I didn’t create any layer so Control + Z, new layer, OK, on top of, straight down. Let’s reverse that, actually. Yeah, that will work. Now then let’s reduce the opacity. So that’s the way it looks now. Get rid of the new layer. Well, you get the idea as far as being able to play around with it. Now then this being potentially a header, you can throw in a darker image here.

Say, of a some person working on a laptop and over here you put a lighter like white text. Again, just wanna give you some ideas, play around with, and as far as the shapes here. That one is a Linear. Let’s try the Spiral. And here’s the Spiral here. Let’s get rid of the background here and increase this all the way. So this is the Spiral that we have on top of the darker background and let’s bring this guy back in, decrease this. As you kinda see the functionality we got there just by adding those two different layers. So we got a lot to work with here. I mean, this is just one of the coolest tools of the Gimp in all. So I hope you enjoyed this, hope you learned something, and of course, I know you’re gonna be able to apply this to a lot of your different Gimp work. Thank you much again for watching and have a great day!

***To download the PDF of this tutorial Click Here.

The Bucket Fill Tool

Hello and welcome to this video series on the Gimp. On this video, we’re gonna be covering the Bucket Fill Tool which is basically a way in which you can add colors or different patterns to the image that you’re working with. And I’ve touched a little bit on this in a prior video but I just kinda go on over this real quick here.

Here are the Fill Type and you can toggle back and forth using the Control and/ or Shift key on your keyboard. And this is the Foreground, the Background, or the Pattern Fill. And the foreground is this color. This is the background color here. And the available pattern fill is this guy or this and they’re the same thing. Now then, we’ve got a lot of modes where we can choose from — Normal, Dissolve, Divide, Screen, Overlay, Dodge, Burn, and so on. Let’s go and show it to you from the normal view. Foreground color fill which will gonna be blue and we’re going to pick similar colors. So everything that I’m touching right now that is red is gonna change colors to the foreground.

Likewise with this one or this one. I hit my Control + Z to back out of these changes here. Try this one. Now the reason why I chose white here but the reason why the rest of this white did not change colors is because it was not contiguous with this. In other words, it wasn’t touching this. And background color the same thing. Change that, change that, change this. And with the pattern fill as our choice here, change that, change that, change that.

And that’s similar colors. We’ll also show you to the different modes up here and the opacity too. For example, let’s go with “fill whole section”. That way it’s gonna fill this whole thing up here. Let me show you. See just like that. Right now we’re on normal and a hundred percent opacity. In other words, it’s solid. Let’s get out of this and change this to, let’s say, fifty percent. Let’s go to thirty percent. So you can see how it changed the opacity. But it changes the opacity or the transparency. So you can adjust this. Of course, it won’t make any adjustments once it’s already been made until you click on this again. Another thing too I wanna show you is get out of this. Go over here, let’s create. This is our layers dialog box. Let’s create another layer.

And now we got a blue layer and as you can see it’s basically like a blue piece of paper covering up our image surface on top of the cone and the ice cream drippings. So if we want to adjust the opacity of this as it is, of course we’re gonna adjust the layer. We can move the down wand so now the ice cream cone is on top of this blue paper. Using that analogy, let’s go and back up. We can change the opacity here. And we’ve got similar modes here we can work with —- Dissolve, can mix a little fuzzy and stuff, and so on.

So that’s one way we can do that too using the dialog box. I think that’s pretty much it, folks. That’s the Bucket Fill. Again, that’s just adding colors to certain sections and of course you can use the fill or the pattern fill. I’m gonna go over this in a different video as far as how to acquire and create additional patterns for your collection here. Okay so that’s pretty much how we can play around with the different options available in the bucket fill tool. Thank you much for watching. I hope you learned something and I think you’re gonna be able to use this quite a bit in your future endeavors. Have a great day!

***To download the PDF of this tutorial Click Here.

The Move Tool

Hello and welcome to our video series on the Gimp. Now in this video, I’m gonna introduce you to the Move Tool and this is one of eight what they call Transform Tools. And the shortcut to get to this function is the letter M, as in “Mary”, on your keyboard or you can just click on the icon. It don’t have a whole lot of options in our dialog box here to choose from.

We’ve got a few modes. One is Layer, which is one that I am familiar with and use. We’ve got another one called Selection and the other one is Path. And we can talk between these two items here — “Pick a layer or guide” or “Move the active layer” which is one that I’m most familiar with and the one that I use. Now to better demonstrate this, let me go ahead and add a third layer here so we can show you just the basic behind moving and we do that by just clicking on this icon here, create a new layer, and we’re gonna name it yellow box if you will. And let’s make this a little bit smaller.

Let’s just say 50 pixels by 50 pixels. And there we have it. And this came up yellow because that was our foreground color. Now with this being selected, that’s what’s gonna be moving. Now if we select the blue, which is this here and you notice if you remember that it looks kinda purple because we adjust the opacity here.

That’s the blue layer and I’m not sure exactly where it was but this is the one that is selected and we have our Move tool over here and it’s going to move the selected layer. The Active Layer to time. Now if you do that by accident, just to let you know, hit your Control button and the letter Z in your keyboard and it puts it back right where it should be. So again, the active layer that is selected in our Layers dialog is what will be moved by using the Move tool. And this works pretty good. One of the functions that I use it mostly for is whenever I’m working on like an image, or a header, or an EBook cover. And I’ve got say some text that I just typed out and I want to center it or I want to bring it down to the bottom here because this is my copyright information. And we’ll get into that in a later point when we cover the Textbox but that’s just one function that we use the Move tool for. And that folks is the pretty quick introduction to the move tool, one of the first of the Transform tools we’re gonna be getting into in this series of videos. Hope you learned something. Thank you much for watching and have a great day!

***To download the PDF of this tutorial, Click Here.